Liqui Moly Products in Kenya: Complete Car-Care and Additive Guide

Quick Answer

Liqui Moly is a German automotive-chemical brand offering motor oils, fuel additives, oil additives, brake fluids, workshop chemicals, lubricants and vehicle-care products.

The correct Liqui Moly product depends on the vehicle, engine type, manufacturer specification and the problem being addressed.

For petrol fuel-system maintenance, consider a product such as Liqui Moly Gasoline Engine System Cleaner or Pro-Line Direct Injection Cleaner, provided the vehicle and fuel system are compatible.

For hydraulic tappet noise caused by deposits inside the oil circuit, Liqui Moly Hydraulic Lifter Additive may assist. It will not repair worn lifters, low oil pressure or mechanical engine damage.

For brake-fluid servicing, use DOT 4 or DOT 5.1 only when the vehicle manufacturer specifies that grade. Brake-fluid replacement should normally be performed by a qualified technician.

For minor oil seepage caused by hardened rubber or plastic seals, Pro-Line Oil Leak Stop is intended to condition compatible seals. It cannot repair cracked components, damaged gaskets or major leaks.

For vehicle appearance and maintenance, Liqui Moly also offers paint polish, rubber care, workshop cleaners and temporary puncture assistance.

Red Rhino carries a selection of genuine Liqui Moly products in Kenya, subject to current availability.

Browse Car-Care Products at Red Rhino

---

About Liqui Moly

Liqui Moly was founded in Ulm, Germany, in 1957.

The company’s name comes from molybdenum disulfide, commonly abbreviated as MoS₂. This solid lubricant formed the basis of Liqui Moly’s early oil-additive technology.

MoS₂ can create a lubricating film on compatible metal surfaces, helping reduce friction under particular operating conditions.

Liqui Moly has since expanded far beyond its original oil additive. Its international range includes thousands of products across categories such as:

• Engine oils

• Transmission oils

• Fuel additives

• Engine-oil additives

• Greases

• Assembly pastes

• Brake fluids

• Coolants

• Workshop chemicals

• Motorcycle products

• Marine products

• Vehicle cleaning and detailing products

Liqui Moly states that its motor oils and additives are developed and produced in Germany. Additive production is associated with Ulm, while oil production takes place in Saarlouis.

The brand has also received repeated reader-voted automotive Best Brand awards in Germany and other markets.

---

Important: Additives Are Not a Substitute for Diagnosis

Automotive additives can support maintenance or address certain deposit-related symptoms, but they cannot repair every mechanical fault.

For example:

• Fuel cleaner cannot repair a failed injector.

• Hydraulic lifter additive cannot repair a worn camshaft.

• Oil leak stop cannot repair a cracked engine casing.

• Octane booster cannot correct an ignition-system fault.

• Brake fluid cannot repair a leaking brake line.

• Tire repair spray cannot make a damaged tyre permanently safe.

Warning lights, major fluid loss, overheating, severe knocking, brake problems or sudden performance changes should be diagnosed by a qualified technician.

Always confirm:

• Vehicle make and model

• Engine type

• Fuel type

• Oil specification

• Fluid specification

• Product compatibility

• Manufacturer instructions

• Required dosage

before adding any chemical to a vehicle.

---

Liqui Moly Product Comparison

Product	Category	Intended role	Important limitation
Gasoline Engine System Cleaner 300ml	Petrol fuel additive	Cleans parts of the petrol injection and combustion system	Cannot repair damaged injectors or mechanical faults
Pro-Line Direct Injection Cleaner 120ml	PEA petrol additive	Cleans petrol fuel systems and injectors	Added through the fuel tank; not an intake-valve spray
Hydraulic Lifter Additive 300ml	Engine-oil additive	Cleans small oil passages and may reduce hydraulic tappet noise	Will not repair mechanically worn lifters
E10 Additive 150ml	Petrol additive	Fuel-system cleaning and corrosion protection for compatible petrol systems	Only relevant where compatible ethanol-containing petrol is used
Brake Fluid DOT 4 500ml	Brake fluid	Hydraulic brake and clutch systems requiring DOT 4	Use only when DOT 4 is specified
Brake Fluid DOT 5.1 250ml	Low-viscosity brake fluid	Systems specifically requiring DOT 5.1	Not the same as silicone-based DOT 5
Pro-Line Oil Leak Stop 1L	Engine-oil additive	Conditions compatible rubber and plastic engine seals	Not for cracked parts, major leaks or damaged gaskets
Paint Polishing Cream 300g	Paint care	Cleans, lightly polishes and protects glossy paint	Cannot remove deep scratches or restore missing paint
Rubber Care 500ml	Rubber maintenance	Cleans and maintains compatible rubber surfaces	Keep away from tread, pedals and grip surfaces
Rapid Cleaner 500ml	Workshop cleaner	Degreases compatible brake and mechanical parts	Strong solvent; professional handling is recommended
Exhaust Assembly Paste 150g	Workshop assembly product	Helps seal exhaust-system joints during assembly	Not a general-purpose anti-seize compound
Tire Repair Spray 500ml	Temporary roadside assistance	Temporarily seals and inflates some punctured tyres	Not a permanent repair and unsuitable for major damage
Liquid Hand Cleaning Paste 500ml	Workshop hygiene	Removes grease, oils and workshop contamination from hands	Follow skin and product instructions

---

1. Liqui Moly Gasoline Engine System Cleaner 300ml

Liqui Moly Gasoline Engine System Cleaner 300ml is a petrol fuel-system treatment.

It is designed to work through the fuel system while the vehicle is being driven.

Intended Functions

The product is formulated to help:

• Remove deposits from petrol injection components

• Clean parts of the combustion system

• Support more consistent fuel delivery

• Protect fuel-system components against corrosion

• Maintain cleaner combustion

• Improve drivability where deposits are contributing to poor performance

Liqui Moly lists it for gasoline engines, including direct-injection systems, with the contents of one 300ml container intended for up to approximately 75 litres of petrol.

Best Suited For

• Petrol engines

• Preventive fuel-system maintenance

• Vehicles with deposit-related hesitation

• Uneven running where contamination is suspected

• Petrol vehicles with direct or port fuel injection

What It Cannot Fix

It cannot repair:

• Electrically failed injectors

• Faulty fuel pumps

• Damaged sensors

• Low engine compression

• Ignition-coil failures

• Worn spark plugs

• Mechanical engine damage

• Severe intake-valve deposits that the fuel does not contact

A diagnostic scan and mechanical inspection may be required before assuming dirt is responsible for poor performance.

---

2. Liqui Moly Pro-Line Direct Injection Cleaner 120ml

Liqui Moly Pro-Line Direct Injection Cleaner 120ml is a concentrated petrol additive using polyetheramine, commonly abbreviated as PEA.

Despite its name, it is not normally sprayed directly into the intake system.

The 120ml container is formulated for approximately 30–50 litres of petrol and is added to the fuel according to the product instructions.

Intended Functions

It is designed to help clean:

• Petrol injectors

• Fuel-system components

• Parts of the combustion chamber

• Deposit-affected fuel-delivery components

Suitable Engines

Liqui Moly lists it for passenger vehicles with four-stroke gasoline engines.

It may be used in:

• Gasoline direct-injection engines

• Port-injection petrol engines

• Naturally aspirated petrol engines

• Turbocharged petrol engines where otherwise compatible

Important Direct-Injection Limitation

In a gasoline direct-injection engine, fuel is injected directly into the combustion chamber.

This means fuel additives do not normally wash over the backs of the intake valves in the same way they may in a port-injection engine.

A fuel-tank additive may clean the injectors and fuel-contacted areas, but it cannot be assumed to remove severe intake-valve deposits upstream of the injector.

Where intake-valve carbon is suspected, a qualified workshop should diagnose the engine and recommend an appropriate intake-cleaning method.

---

3. Liqui Moly Hydraulic Lifter Additive 300ml

Liqui Moly Hydraulic Lifter Additive 300ml is formulated to clean small oil passages associated with hydraulic tappets or lifters.

Hydraulic lifters rely on engine-oil pressure and clean internal oil channels to operate correctly.

Intended Functions

The product may help:

• Reduce deposit-related hydraulic tappet noise

• Clean small oil bores and ducts

• Improve the operation of oil-fed hydraulic components

• Support oil-pressure-operated chain tensioners where compatible

One 300ml container is generally intended for up to approximately six litres of engine oil.

When It May Help

It may be useful when ticking is caused by:

• Varnish

• Oil deposits

• Restricted oil passages

• Contaminated hydraulic lifters

When It Will Not Help

It cannot repair:

• Mechanically worn lifters

• A worn camshaft

• Low oil pressure

• A blocked oil pickup

• Incorrect oil viscosity

• Low engine-oil level

• Damaged timing components

• Excessive valve clearance

• Internal engine damage

Engine ticking should be inspected rather than automatically treated with an additive.

The product is not suitable for motorcycles with wet clutches unless the specific application guidance expressly permits it.

---

4. Liqui Moly E10 Additive 150ml

Liqui Moly E10 Additive 150ml is designed for compatible gasoline engines using petrol containing up to approximately 10% ethanol.

One 150ml container is intended for approximately 35–70 litres of petrol.

Intended Functions

Liqui Moly describes the product as providing:

• Fuel-system cleaning

• Corrosion protection

• Moisture-related protection

• Improved drivability

• Support for cleaner combustion

Important Kenyan-Market Consideration

Do not assume that all petrol sold in Kenya contains E10.

Fuel composition can depend on national standards, supplier and product type. The product should be selected only after confirming that it is relevant to the petrol being used and compatible with the vehicle.

Older cars, motorcycles, scooters and carburettor-equipped engines may have different material-compatibility requirements.

Consult the vehicle manufacturer or a knowledgeable technician before using an ethanol-related additive.

---

5. Liqui Moly Brake Fluid DOT 4

Liqui Moly Brake Fluid DOT 4 500ml is a glycol-based hydraulic brake fluid for systems requiring DOT 4.

What Brake Fluid Does

Brake fluid transfers pressure from the brake pedal through the hydraulic braking system.

Depending on the vehicle, it may also be used in a hydraulic clutch system.

Brake fluid must maintain suitable performance across:

• High braking temperatures

• Low temperatures

• ABS operation

• Hydraulic pressure changes

• Extended service periods

Use DOT 4 Only Where Specified

DOT 4 is common, but it is not correct for every vehicle.

Always check:

• Owner’s manual

• Brake-fluid reservoir cap

• Workshop information

• Manufacturer service documentation

Do not choose brake fluid only by vehicle brand.

Two cars from the same manufacturer may require different fluid specifications.

Brake Fluid Absorbs Moisture

Glycol-based brake fluid is hygroscopic, meaning it absorbs moisture over time.

As moisture content increases:

• Boiling performance can decline.

• Internal corrosion risk can increase.

• Brake response may deteriorate under severe use.

• The fluid may no longer meet the intended specification.

Follow the vehicle manufacturer’s replacement schedule or have the fluid tested by a qualified workshop.

Brake-fluid replacement is safety-critical and should generally be performed by a trained technician.

---

6. Liqui Moly Brake Fluid DOT 5.1

Liqui Moly Brake Fluid DOT 5.1 250ml is a low-viscosity glycol-based brake fluid.

Its low-temperature flow characteristics can be useful in modern electronically controlled braking systems.

Potential Applications

DOT 5.1 may be specified for systems using:

• ABS

• Electronic stability control

• Traction-control braking intervention

• Modern hydraulic control units

• Brake systems requiring low-viscosity DOT 5.1 fluid

However, having ABS or stability control does not automatically mean a vehicle requires DOT 5.1.

Many ABS-equipped vehicles specify DOT 4 or a specialised low-viscosity DOT 4 fluid.

DOT 5.1 Is Not DOT 5

DOT 5.1 and DOT 5 are chemically different.

• DOT 5.1 is generally glycol-based.

• DOT 5 is silicone-based.

They must not be confused.

Never add fluid based only on the similar numbering.

Use exactly the specification stated by the vehicle manufacturer.

---

DOT 4 vs DOT 5.1

Factor	DOT 4	DOT 5.1
Chemical family	Usually glycol-based	Usually glycol-based
Typical application	Many passenger vehicles and motorcycles	Vehicles specifically requiring DOT 5.1
ABS compatibility	Many DOT 4 fluids are used in ABS systems	Low viscosity can support fast electronic brake control
Can it replace the other automatically?	No	No
Selection method	Vehicle specification	Vehicle specification
Same as silicone DOT 5?	No	No

Do not “upgrade” brake fluid without manufacturer approval.

A fluid with a higher numerical designation is not automatically better for a particular braking system.

---

7. Liqui Moly Pro-Line Oil Leak Stop 1L

Liqui Moly Pro-Line Oil Leak Stop 1L is an engine-oil additive intended primarily for professional and workshop use.

It is designed to condition compatible rubber and plastic engine seals that have hardened with age.

Intended Functions

It may help address minor leakage associated with:

• Shaft seals

• Valve-stem seals

• Compatible rubber sealing components

• Hardened plastic or elastomer seals

It may also reduce blue exhaust smoke when the cause is compatible seal deterioration.

What It Cannot Repair

Oil Leak Stop cannot repair:

• A cracked engine block

• A damaged oil sump

• A broken oil line

• A loose drain plug

• A failed oil filter seal

• A severely damaged gasket

• Major turbocharger damage

• Excessive piston-ring wear

• Large or sudden oil leaks

A major leak can lead to oil starvation and engine failure.

Inspect the vehicle immediately when:

• Oil level drops quickly

• Oil forms a large puddle

• The oil-pressure warning appears

• Smoke increases suddenly

• Oil reaches the exhaust

• The engine becomes noisy

The one-litre Pro-Line package is a workshop-sized product and must be dosed according to the engine’s oil capacity and Liqui Moly’s instructions.

---

8. Liqui Moly Paint Polishing Cream 300g

Liqui Moly Paint Polishing Cream 300g is designed to clean, lightly polish and protect compatible glossy automotive paint.

It contains carnauba wax and mild polishing components.

Intended Functions

It may:

• Restore gloss to lightly weathered paint

• Reduce the appearance of very fine hairline marks

• Smooth light surface oxidation

• Improve colour depth

• Leave a protective wax finish

What It Cannot Fix

It cannot repair:

• Deep scratches

• Missing clear coat

• Exposed primer

• Exposed metal

• Rust

• Peeling paint

• Severe oxidation

• Cracked paint

• Dents

If a fingernail catches strongly in a scratch, normal hand polish is unlikely to remove it.

Paint Compatibility

Use only on compatible glossy automotive paint.

Do not apply conventional gloss polish to:

• Matte paint

• Satin paint

• Textured plastic

• Unpainted trim

• Vinyl wraps

• Paint-protection film

unless the relevant manufacturer confirms compatibility.

Test on a small inconspicuous area before treating the complete vehicle.

---

9. Liqui Moly Rubber Care 500ml

Liqui Moly Rubber Care 500ml is designed for compatible automotive rubber surfaces.

Suitable Areas May Include

• Door seals

• Window seals

• Boot seals

• Rubber mats

• Selected exterior rubber trim

• Tyre sidewalls where permitted

Benefits

It may help:

• Refresh the appearance of rubber

• Maintain flexibility

• Reduce drying

• Produce a clean satin finish

• Prevent seals from sticking

• Support routine rubber maintenance

Do Not Apply It To

• Tyre tread

• Brake components

• Pedals

• Steering wheel

• Gear-selector grip

• Motorcycle tyre contact surfaces

• Drive belts

• Windscreen-wiper contact edges unless approved

Products placed on grip surfaces can create a slipping hazard.

Clean rubber before applying a care product and remove excess material.

---

10. Liqui Moly Rapid Cleaner

Liqui Moly Rapid Cleaner 500ml is a fast-evaporating workshop cleaner for degreasing compatible mechanical components.

It is commonly used on parts such as:

• Brakes

• Clutches

• Transmission components

• Engine parts

• Workshop tools

• Greasy metal assemblies

Important Safety Considerations

Rapid Cleaner is a powerful solvent product.

It should be:

• Used with suitable ventilation

• Kept away from flames and sparks

• Kept away from hot surfaces

• Kept away from eyes and skin

• Stored away from children

• Tested before use near plastic, rubber or painted surfaces

It is not a general household cleaner.

Brake-system work should be performed by a qualified technician.

---

11. Liqui Moly Exhaust Assembly Paste 150g

Liqui Moly Exhaust Assembly Paste 150g is intended to assist with gas-tight assembly of compatible exhaust-system joints.

Typical Professional Applications

• Exhaust pipe connections

• Sleeves

• Clamps

• Flanges

• Tailpipe fittings

• Compatible exhaust joints

It is a heat-resistant sealing and assembly paste.

It should not automatically be used as:

• General bearing grease

• Brake lubricant

• Wheel-bolt lubricant

• Electrical contact paste

• Oxygen-sensor thread compound

• Universal anti-seize

Incorrect products on exhaust sensors or threaded components can interfere with installation, torque or sensor performance.

Exhaust work should be performed when the system is completely cool and by someone familiar with the vehicle’s exhaust design.

---

12. Liqui Moly Liquid Hand Cleaning Paste 500ml

Liqui Moly Liquid Hand Cleaning Paste 500ml is intended for cleaning hands contaminated by workshop substances.

It is formulated to remove materials such as:

• Engine oil

• Grease

• Brake dust

• Tar

• Bitumen

• Paint residue

• General workshop grime

Liqui Moly describes it as dermatologically tested and formulated with natural abrasive material derived from finely ground corn cob.

Use according to the label and rinse thoroughly.

Workshop hand cleaner does not replace:

• Protective gloves

• Correct chemical handling

• Immediate washing after exposure

• Medical attention following chemical burns or serious exposure

---

13. Liqui Moly Tire Repair Spray 500ml

Liqui Moly Tire Repair Spray 500ml is a temporary roadside puncture-assistance product.

It is designed to introduce sealing material and pressure into some punctured passenger-car or caravan tyres without removing the wheel.

It Is Intended For

• Temporary emergency assistance

• Small, repairable punctures

• Reaching a safe location or tyre specialist

• Situations where changing the wheel is unsafe or impractical

It Is Not Suitable For Every Tyre Problem

It should not be relied on for:

• Sidewall tears

• Large holes

• Split tyres

• Exposed cords

• Damaged rims

• Tyres that have left the rim

• Blowouts

• Tyres driven flat for a long distance

• Repeated pressure loss without diagnosis

Temporary Repair Only

A tyre treated with repair spray must still be inspected by a tyre professional.

The technician should be informed that sealant was used.

Follow all instructions on:

• Maximum speed

• Maximum distance

• Tyre-pressure checking

• Post-use inspection

• Professional repair eligibility

Do not treat a repaired tyre as permanently safe merely because it holds pressure.

---

Which Liqui Moly Product Matches Which Category?

Maintenance area	Relevant product category
Petrol injector and fuel-system deposits	Gasoline fuel-system cleaner
Direct-injection petrol fuel-system cleaning	PEA direct-injection cleaner
Deposit-related hydraulic tappet noise	Hydraulic lifter additive
Compatible E10 petrol maintenance	E10 fuel additive
Hydraulic brake service	Correct manufacturer-specified brake fluid
Aged rubber engine seals	Compatible oil leak-stop treatment
Light paint oxidation and hairline marks	Paint polish
Rubber seals and mats	Rubber-care product
Workshop degreasing	Rapid Cleaner
Exhaust-joint assembly	Exhaust Assembly Paste
Temporary puncture assistance	Tire Repair Spray
Workshop hand contamination	Hand Cleaning Paste

This table is for category guidance only.

It does not replace diagnosis or the vehicle manufacturer’s specification.

---

Can Liqui Moly Additives Be Mixed?

Do not combine several additives simply because each product is individually compatible with the engine.

Multiple products may:

• Alter the intended oil-additive balance

• Exceed recommended treatment ratios

• Duplicate cleaning chemistry

• Affect viscosity

• Create unpredictable interactions

• Breach manufacturer requirements

Before combining products, confirm compatibility using:

• Liqui Moly’s product information

• Vehicle manufacturer instructions

• Oil or fuel specifications

• Advice from a qualified technician

Never add a product to the wrong system.

Fuel additives, oil additives, cooling-system products, transmission additives and brake fluids are not interchangeable.

---

Can Liqui Moly Be Used in Any Car?

No single Liqui Moly product is suitable for every vehicle.

Compatibility may depend on:

• Petrol or diesel engine

• Two-stroke or four-stroke engine

• Direct or port fuel injection

• Diesel particulate filter

• Wet or dry motorcycle clutch

• Engine-oil capacity

• Oil specification

• Transmission type

• Brake-fluid specification

• Fuel composition

• Emission-control system

• Manufacturer approval

The model name alone is not always enough.

Engine and transmission variants can differ within the same vehicle model.

---

Automotive-Chemical Safety

Liqui Moly products should be stored and handled as automotive chemicals.

General Safety Rules

• Read the complete label before use.

• Keep products in their original containers.

• Do not transfer them into drink bottles.

• Keep away from children and pets.

• Avoid contact with eyes and skin.

• Use suitable gloves where directed.

• Work in a well-ventilated area.

• Keep aerosols away from heat and flame.

• Do not smoke during application.

• Do not mix unrelated chemicals.

• Dispose of used fluids responsibly.

• Do not pour automotive chemicals into drains or soil.

• Seek medical help following serious exposure.

Brake fluid, solvents and fuel additives can damage paint, plastics or skin.

Clean spills according to the product safety instructions.

---

Common Liqui Moly Buying Mistakes

Choosing by Vehicle Brand Alone

A Toyota, BMW, Subaru or Mercedes-Benz badge does not determine the correct additive or fluid.

The engine and fluid specification matter.

Assuming Every Engine Noise Is a Dirty Lifter

Ticking can come from several mechanical or lubrication problems.

Using a Petrol Cleaner in a Diesel Vehicle

Petrol and diesel additives have different formulations and intended systems.

Assuming DOT 5.1 Is Always Better Than DOT 4

Use the specified grade rather than the highest number.

Confusing DOT 5 with DOT 5.1

DOT 5 is silicone-based, while DOT 5.1 is normally glycol-based.

Using Oil Leak Stop for a Major Leak

Large leaks need diagnosis and repair.

Expecting Polish to Repair Deep Scratches

Polish only affects light surface imperfections.

Treating Tire Repair Spray as Permanent

The tyre still requires inspection.

Adding Several Products Together

More additives do not necessarily create better protection.

Following a Universal Service Interval

Product frequency depends on the label, vehicle, fuel, mileage and diagnosis.

---

Frequently Asked Questions

Is Liqui Moly Available in Kenya?

Yes.

Red Rhino stocks a selection of Liqui Moly automotive products for delivery within Nairobi and shipping across Kenya, subject to current availability.

Is Liqui Moly Made in Germany?

Liqui Moly states that its motor oils and additives are developed and produced in Germany.

Additive production is based in Ulm, while oil production takes place in Saarlouis.

Is Red Rhino an Official Liqui Moly Distributor?

Red Rhino should be described as a genuine Liqui Moly retailer or stockist unless formal distributor or authorised-dealer documentation has been confirmed.

Red Rhino stocks genuine Liqui Moly products through established supply channels.

Does Every Engine Need an Additive?

No.

A correctly maintained engine using the correct oil and fuel may not need additional treatment.

Additives should address a defined maintenance goal or diagnosed condition.

Can Liqui Moly Additives Be Used with Any Engine Oil?

No universal statement applies to every additive.

Many Liqui Moly oil additives are compatible with common mineral and synthetic engine oils, but exclusions exist.

Check:

• Product instructions

• Oil type

• Engine type

• Wet-clutch compatibility

• Diesel particulate-filter compatibility

• Treatment ratio

Which Liqui Moly Product Is Best for a Diesel Car?

Use a diesel-specific product selected for the actual requirement.

Petrol products such as Gasoline Engine System Cleaner, Direct Injection Cleaner and E10 Additive are not intended for diesel fuel.

Diesel vehicles may require products such as:

• Diesel fuel-system cleaner

• Diesel Purge

• Super Diesel Additive

• DPF protection

• Diesel intake cleaner

depending on diagnosis and availability.

How Often Should Fuel-System Cleaner Be Used?

Follow the product instructions.

Do not use a universal 10,000km or 15,000km schedule for every cleaner.

The correct interval depends on:

• Product formulation

• Fuel quality

• Engine type

• Mileage

• Symptoms

• Preventive-maintenance plan

Does Pro-Line Direct Injection Cleaner Clean Intake Valves?

Not necessarily.

Because it is introduced through the petrol tank, it cleans fuel-contacted components.

In a direct-injection engine, the fuel normally does not pass across the backs of the intake valves.

Will Hydraulic Lifter Additive Stop All Ticking?

No.

It may help when deposits are restricting hydraulic lifters or oil passages.

It will not repair mechanical wear or low oil pressure.

Can I Use DOT 5.1 Instead of DOT 4?

Only when the vehicle manufacturer permits it.

Do not substitute brake-fluid grades based only on boiling point or numbering.

How Often Should Brake Fluid Be Changed?

Follow the vehicle manufacturer’s service schedule or have the fluid tested.

Many manufacturers specify time-based replacement because brake fluid absorbs moisture, but the exact interval varies.

Does Oil Leak Stop Repair Oil Leaks Permanently?

It may condition compatible aged seals and reduce minor seepage.

It cannot repair cracked components, damaged gaskets or major leaks.

Can Paint Polishing Cream Remove Scratches?

It may reduce the appearance of very fine surface marks.

It cannot repair deep scratches or missing paint.

Can Rubber Care Be Used on Tyres?

It may be suitable for tyre sidewalls where permitted.

Never apply it to the tread or any braking or grip surface.

Is Tire Repair Spray a Permanent Repair?

No.

It is temporary roadside assistance. The tyre must be professionally inspected.

How Can I Identify Genuine Liqui Moly Products?

Buy from an established retailer that provides:

• Original branded packaging

• A proper receipt

• Clear product information

• Traceable business details

• Customer support

• Batch or production markings where applicable

Packaging details may vary by product, country and production period. A hologram should not be presented as a universal authenticity feature unless Liqui Moly confirms it for the exact product and market.

Does Red Rhino Deliver Liqui Moly Products Outside Nairobi?

Red Rhino offers Nairobi delivery and countrywide shipping, subject to product availability, destination and courier restrictions.

Some automotive chemicals or aerosols may be subject to special transport requirements.

---

Shop Liqui Moly Products at Red Rhino

Explore Red Rhino’s automotive range, including engine additives, fuel treatments, brake fluids, workshop products and vehicle-care products.

• Shop All Car-Care Products

• Shop Fuel Additives

• Shop Oil Additives

• Shop Engine Cleaners and Degreasers

• Shop Wax and Polish

Product pages can remain visible when an item is temporarily unavailable.

Check the live product page or contact Red Rhino before ordering.

---

Visit Red Rhino in Nairobi

Red Rhino
PJ Center, Shop D11
4th Parklands Avenue, Parklands
Opposite Highridge Primary School
Nairobi, Kenya

Call or WhatsApp:
+254 797 080 808

Email:
info@myredrhino.com

Red Rhino stocks genuine automotive-maintenance and car-care products from Liqui Moly, Formula 1, Shield, Gunk, Galaxy Car Care and other selected brands.

Customers can shop online for qualifying Nairobi delivery and countrywide shipping or visit the showroom for product and compatibility guidance.

Red Rhino — Where Quality Brands Come Together.

Automotive chemicals must be selected and used according to the vehicle manufacturer’s specifications and the product label. Product ranges, packaging, prices and availability may change. Serious engine, brake, tyre or fluid-system problems require inspection by a qualified professional.