Gunk Engine Degreaser 15oz 425g-T105-EB1

Gunk Engine Degreaser

Removes grease and grime from auto, power mower, marine and tractor engines, metal, concrete and tires, industrial equipment where water is permitted. The gel engine degreaser contains special additives that allow the product to cling to vertical surfaces, allowing the solvents to loosen difficult soils and absorb greases and oils to be carried away during the rinsing phase.

DIRECTIONS

• Do not start the engine after yotu have applied GUNK original until entire engine is properly rinsed.
• Rising is necessary to properly clean engine and avoid potential fire harzard.

SAFEGUARD OUR ENVIRONMENT.USE THE MINIMUM AMOUNT TO RINSE WATER NECESSARY AND SEE DISPOSAL  STATEMENT BELOW:

• Engine must be off and cool.
• care must be taken with all underhood wiring and electronics sensors or components cover any caburator or intake system openning,cover exposed electricals & electronics components .
• shake well and apply generously to dry engine.
• Allow Gunk original to soak for 10 to 15 minutes.
• Rinse all areas with fine stream of water from top down.
• When complete ,remove added coverings and replace any removed parts.start engine &idle 15minutes to assure complete drying.