Philips 1000 Series Steam Iron 1800W DST1020/36
- ⚡ 1800W heating power
- 💨 Up to 20g/min continuous steam
- 🧼 Up to 90g steam boost
- 💧 Non-stick soleplate
- 🎚️ 250ml water tank
- 👕 Water spray
- 🛡️ Calc-clean function
- 🏠 Two-year Philips warranty
Product overview
The Philips 1000 Series Steam Iron 1800W DST1020/36 is an accessible everyday steam iron for school uniforms, workwear, household laundry and routine fabric care. Its 1800W heating system, continuous steam and non-stick soleplate provide the core functions most homes need without a complicated electronic interface.
Steam helps relax ordinary creases while the spray function targets stubborn dry areas. The soleplate then provides the direct contact needed to flatten fabric and define edges more sharply than a garment steamer normally can.
Steam and soleplate performance
The iron delivers Up to 20g/min and a boost of Up to 90g for more resistant creases. The Non-stick is designed to glide across common ironable fabrics when the correct temperature is selected.
Use continuous steam for routine areas and the boost selectively. Repeated steam bursts consume water quickly and can leave excess moisture if the soleplate temperature is too low.
Water tank, spray and scale care
The tank holds 250ml. The spray function adds moisture directly to dry, stubborn creases, while the calc-clean feature supports removal of mineral deposits.
Empty the tank after use, allow the soleplate to cool and wipe it with a soft cloth. Do not use metal scrubbers or abrasive cleaners. Water choice should follow the manual, particularly in hard-water areas.
Fabric control and safe ironing
Sort garments by care label and begin with lower-temperature fabrics. Synthetic materials can be damaged by excessive heat, while heavier cotton may require a hotter setting and more steam.
Stand the iron safely during pauses, keep the cord clear of the soleplate and never leave it unattended while connected. Allow it to cool completely before storage.
A practical ironing routine
Start with lower-temperature garments while the iron is heating and finish with heavier cotton items that use more steam. The Non-stick should move continuously across the fabric; leaving it stationary can create shine, scorching or heat damage even at a normally suitable setting.
Use spray for a local dry crease and reserve the steam boost for thicker or resistant areas. Excessive bursts can empty the tank quickly and may leave water marks if the soleplate is not hot enough. Regular calc-clean maintenance protects the steam openings from mineral buildup.
This standard listing carries the normal two-year Philips warranty for household use.
Choosing the right model
Relevant alternatives already verified in the Red Rhino catalogue include Philips 2000 Series Steam Iron DST2010/26, Philips 3000 Series Steam Iron DST3020/26, Philips Stand Garment Steamer STE1010/76.
Compare soleplate, steam output, water capacity, scale maintenance and special-condition warranty where applicable. The standard and Rain Rescue listings use the same underlying model but have different condition terms.
Care, safety and realistic expectations
Match temperature to the garment-care label, keep the iron upright during pauses and disconnect it before filling, emptying or cleaning. Never leave a connected iron unattended.
Steam and glide performance depend on soleplate temperature, water quality and scale maintenance. Rain Rescue products also carry the disclosed repacked condition and separate warranty term.
Key Features and Benefits
-
1800W heating power: Heats the soleplate promptly and supports continuous steam for normal household ironing loads.
-
Up to 20g/min continuous steam: Supplies steady moisture across normal fabric areas so the soleplate can flatten routine creases more efficiently.
-
Up to 90g steam boost: Adds a concentrated burst for stubborn folds, collars and thicker areas that need more moisture.
-
Non-stick soleplate: Glides across compatible fabrics with less drag and is easier to wipe clean than an untreated surface.
-
250ml water tank: Carries enough water for routine steam ironing while keeping the iron manageable in the hand.
-
Water spray: Applies moisture directly to dry, resistant creases before the hot soleplate passes over them.
-
Calc-clean function: Provides a maintenance route for flushing mineral buildup and protecting steam performance over time.
-
Two-year Philips warranty: Provides the stated manufacturer or Red Rhino support period, subject to the applicable product and condition terms.
Verified Technical Specifications
| Specification |
Details |
| Brand |
Philips |
| Model |
DST1020/36 |
| Power |
1800W |
| Continuous steam |
Up to 20g/min |
| Steam boost |
Up to 90g |
| Soleplate |
Non-stick |
| Water tank |
250ml |
| Spray |
Yes |
| Calc-clean |
Yes |
| Variable steam |
Yes |
| Voltage |
220–240V |
| Warranty |
2 years |
Recommended Applications
- School uniforms and workwear
- Cotton, blends and other ironable fabrics
- Sharp collars and trouser creases
- Routine household laundry
- Customers wanting direct soleplate pressure
Why Choose This Product?
Choose this model for direct, familiar ironing with useful steam and a non-stick soleplate at an accessible specification level.
Distributed in Kenya by Red Rhino.
Frequently Asked Questions
What soleplate does it use?
Non-stick
Does it have a steam boost?
Up to 90g
Should the tank be emptied after ironing?
Yes. Empty remaining water and allow the iron to cool before storage.
Can it be used on every fabric?
Use only on ironable fabrics and match temperature to the garment-care label.
What warranty applies?
Two years through the Philips manufacturer warranty.
Is the Rain Rescue version factory sealed?
This is the standard product listing.
Can the iron be stored with water inside?
It is better to empty the tank after use and store the cooled iron upright.
Why can an iron drip water?
Dripping can occur when steam is used before the soleplate is hot enough, when the tank is overfilled or when scale obstructs the steam system.
Explore Related Products
