Philips 5000 Series Smart Tower Ceramic Heater CX5120/11
- 🔥 Up to 2000W ceramic heating
- ⚡ Warm air in approximately two seconds
- 🌡️ Adjustable temperature from 1–37°C
- ↔️ 60° oscillation
- 📱 Philips Air+ app control
- 🧠 Eco AI energy-management mode
- 🛡️ Tip-over and overheat protection
- 📅 Two-year Philips warranty
Product overview
The Philips 5000 Series CX5120/11 is a smart ceramic tower heater designed for bedrooms, living rooms and home offices up to approximately 20m² under suitable room conditions. Its ceramic heating element delivers warm airflow quickly, while 60-degree oscillation distributes heat across a wider area than a fixed fan heater.
The heater can be controlled from its display or through the Philips Air+ app over a compatible 2.4GHz Wi-Fi network. Smart scheduling, remote adjustment and Eco AI support make it practical for customers who want more control than a basic manual heater.
Two heating levels and precise temperature control
The heater provides 1200W and 2000W power settings. Lower power can maintain comfort in a smaller or already-warmed room, while the higher setting supports faster warm-up. Temperature can be set from 1 to 37°C, allowing the thermostat to cycle heating as the room approaches the selected level.
Room size, insulation, ceiling height, open doors and outdoor temperature affect actual performance. The stated 20m² guidance is not a guarantee for every building.
Fast ceramic heating
Philips states that warm air begins in approximately two seconds. Ceramic heating responds quickly and avoids the long warm-up associated with some traditional heaters. The appliance still requires time to raise the temperature of the entire room.
60° oscillation
Oscillation sweeps warm airflow across a wider area, reducing concentrated heat in one direction. Place the heater on a flat floor with clear space around the air inlet and outlet. Do not position it directly against furniture, curtains or walls.
Philips Air+ app and voice compatibility
Connect the heater to a compatible 2.4GHz Wi-Fi network to adjust temperature, modes and schedules through the Philips Air+ app. Compatibility with supported Alexa and Google voice-control environments may depend on region, account setup and current service availability.
Remote control does not replace safe placement. The heater must never be covered or used where clothing, bedding or paper can fall onto it.
Eco AI and scheduling
Eco AI uses room and usage information to manage heating more efficiently than continuous full-power operation. Energy savings vary by room conditions, temperature target and user behaviour. Scheduling allows planned warm-up or shut-down periods through the app.
Safety systems
Tip-over protection switches the heater off if it is knocked from its operating position, while overheat protection responds to excessive internal temperature. These systems add protection but cannot make unsafe use acceptable. Keep the heater away from water, never use it to dry clothes and connect it directly to a suitable wall outlet rather than an overloaded extension lead.
Key Features and Benefits
-
Up to 2000W heating: Provides strong room-heating performance.
-
Two power settings: Offers 1200W and 2000W operation.
-
1–37°C control: Allows precise thermostat adjustment.
-
60° oscillation: Distributes warm airflow across a wider area.
-
Air+ app: Supports remote control, schedules and mode adjustment.
-
Eco AI: Manages heating according to room conditions and settings.
-
Tip-over protection: Stops heating if the unit is displaced.
-
Overheat protection: Adds protection against excessive internal temperature.
Verified Technical Specifications
| Specification |
Details |
| Brand |
Philips |
| Model |
CX5120/11 |
| Series |
5000 Series |
| Product type |
Smart ceramic tower heater |
| Maximum power |
2000W |
| Power settings |
1200W and 2000W |
| Temperature range |
1–37°C |
| Recommended room size |
Up to approx. 20m² |
| Oscillation |
60° |
| Warm-air response |
Approx. 2 seconds |
| Connectivity |
2.4GHz Wi-Fi |
| App |
Philips Air+ |
| Voice compatibility |
Supported Alexa and Google environments |
| Sound level |
Approx. 40.5–55dB(A) |
| Cord length |
Approx. 1.7m |
| Safety |
Tip-over and overheat protection |
| Colour |
Dark grey/black |
| Warranty |
2 years |
Recommended Applications
- Bedrooms
- Living rooms
- Home offices
- Cool mornings and evenings
- Customers who want app scheduling and remote control
Why Choose This Product?
Choose the CX5120/11 when you want rapid ceramic heating, broader oscillation and smart app control in a modern tower design.
Distributed in Kenya by Red Rhino.
Frequently Asked Questions
What room size is it designed for?
Up to approximately 20m² under suitable room conditions.
Does it require Wi-Fi to heat?
No. Core controls are available on the appliance; Wi-Fi enables app features.
Which Wi-Fi band is supported?
2.4GHz.
Can it be used to dry clothes?
No. Never cover the heater.
Does it switch off if tipped over?
It includes tip-over protection.
Can it be used in a bathroom?
Keep it away from water and use only in locations permitted by the manual.
Does Eco AI guarantee a fixed energy saving?
No. Savings vary with room conditions and usage.
What warranty applies?
The standard listing carries a two-year Philips warranty.
Explore Related Products
