Philips Vacuum Replacement Filter Kit XV1220/01
- 🧹 Genuine Philips replacement kit
- 🛡️ Washable motor filter
- 🧽 Washable foam inlay
- 💨 Exhaust filter
- 📅 Designed for compatible 2000 Series bagless vacuums
- 🔄 Recommended annual replacement
- ✅ Supports airflow and motor protection
- 🌬️ Three filtration components in one pack
Product overview
The Philips 2000 Series Bagless Vacuum Filter Kit XV1220/01 is a genuine maintenance set for selected Philips 2000 Series bagless vacuum cleaners. It replaces the motor, foam and exhaust filtration components that gradually collect fine dust and lose airflow after repeated use and washing.
Filter replacement is preventive maintenance rather than a universal repair. It can help when suction is restricted by old filters, but it will not correct a cracked hose, damaged motor, blocked nozzle or electrical fault. Compatibility must be checked using the full vacuum model number.
Three filtration stages in one kit
The package includes 1 washable motor filter, 1 washable foam inlay, 1 exhaust filter. The motor and foam components protect internal airflow, while the exhaust filter captures fine particles before air leaves the vacuum.
Correct fit matters. Gaps around a generic or incorrectly installed filter can allow dust to bypass the media or restrict airflow more than intended.
Replacement timing and warning signs
Philips recommends replacement Approximately once per year. Earlier replacement may be appropriate in homes with pets, heavy dust or frequent vacuum use.
Warning signs include suction that does not recover after washing, persistent dusty odour, deteriorating foam or a vacuum that runs unusually hot after the hose and container have been checked.
Cleaning and installation
Wash only the components identified as washable, use clean water and allow at least a full day or until completely dry before reinstallation. Direct heat can deform filter material.
Compare the old and new parts, fit each in the correct orientation and never force a cover closed. The vacuum must not operate while required filters are removed or damp.
Maintenance value and correct installation
The XV1220/01 is preventative maintenance rather than an upgrade that changes the vacuum’s original motor rating. Its value comes from restoring the filtration path with components shaped for the compatible families listed in the specification table.
Before installing the kit, empty and clean the dust container and inspect the nozzle, tube and hose. Replacing filters while a blockage remains elsewhere will not restore full suction. Compare the old and new parts, fit them without force and confirm every cover closes normally.
Keep the old filters only until the new set has been fitted and tested successfully. Thereafter, dispose of worn components appropriately and note the replacement date so annual maintenance is easier to plan.
Choosing the right model
Relevant alternatives already verified in the Red Rhino catalogue include Philips Vacuum XB2022/01, Philips Vacuum XB2023/61, Philips Vacuum XB2042/01.
Compatibility must be checked from the full vacuum model number rather than appearance alone. The correct filter shape and seal are essential for airflow, dust control and motor protection.
Care, safety and realistic expectations
Install each component in the correct orientation and allow washable parts to dry fully before use. Never run a compatible vacuum with filters missing or damp.
A new filter kit can restore restricted airflow caused by old filters, but it will not repair a damaged motor, cracked hose or blocked nozzle.
Key Features and Benefits
-
Genuine Philips replacement kit: Matches the dimensions, seals and airflow requirements of the specified Philips vacuum families.
-
Washable motor filter: Protects the motor from fine dust and can be rinsed and reused after it has dried completely.
-
Washable foam inlay: Adds a second protective layer before the motor and can be cleaned between scheduled filter replacements.
-
Exhaust filter: Captures fine dust in the outgoing airflow and should be replaced when age or clogging begins to restrict performance.
-
Designed for compatible 2000 Series bagless vacuums: Reduces the risk of poor sealing or restricted airflow caused by an incorrectly shaped generic filter.
-
Recommended annual replacement: Refreshes filtration after repeated washing and fine-dust buildup that cleaning alone may no longer remove.
-
Supports airflow and motor protection: Helps maintain suction while reducing the amount of fine debris reaching sensitive internal components.
-
Three filtration components in one pack: Replaces the motor filter, foam inlay and exhaust stage together instead of leaving one worn component behind.
Verified Technical Specifications
| Specification |
Details |
| Brand |
Philips |
| Model |
XV1220/01 |
| Product type |
Replacement vacuum filter kit |
| Included |
1 washable motor filter, 1 washable foam inlay, 1 exhaust filter |
| Recommended replacement |
Approximately once per year |
| Verified compatible families |
XB2022, XB2023, XB2042, XB2062, XB2122, XB2123, XB2125 and XB2142 |
| Country of manufacture |
China |
Recommended Applications
- Annual vacuum maintenance
- Replacing deteriorated foam and filters
- Restoring airflow after repeated washing
- Protecting the motor from fine dust
- Compatible Philips 2000 Series bagless vacuums
Why Choose This Product?
Choose this genuine kit when a compatible Philips vacuum needs a complete annual filtration refresh with the correct shapes and sealing surfaces.
Distributed in Kenya by Red Rhino.
Frequently Asked Questions
Which vacuums are compatible?
XB2022, XB2023, XB2042, XB2062, XB2122, XB2123, XB2125 and XB2142
How often should it be replaced?
Approximately once per year
Which parts are washable?
The motor filter and foam inlay are washable; follow the manual and dry completely.
Does it include a dust container?
No. It contains filtration components only.
Will it repair a faulty motor?
No. It is a maintenance kit, not a motor repair.
Can the vacuum run while filters dry?
No. Never operate the vacuum without the required dry filters.
Should all three components be replaced together?
Replacing the full kit keeps the filtration stages on the same maintenance cycle and avoids leaving one heavily worn filter in place.
How long should washed filters dry?
Allow at least a full day or until every part is completely dry, following the vacuum manual.
Explore Related Products
